Monthly Payment Disclaimer
CloseThe values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.
Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.
- Pre-owned
- In Stock
- Tupelo
- Tractor
- Compact
- Tupelo
- Pre-owned
- 2018
- John Deere
- 3039R
- Tractor
- Compact
- Yanmar 3TNV86CT-MJT
- Diesel
- 2600 rpm
- 28.5 kW (38.8 hp)
- Cylinders: 3 / 1.57 L (3 / 95.7 cu in.)
- High pressure common rail direct injection
- Turbocharged
- 86 mm (3.4 in.)
- 90 mm (3.54 in.)
- 19.1:1
- Pressurized
- Water pump
- Dry-type, two-stage dual element
- at rated speed: 105 Nm (77.4 lb-ft)
- Bull Gear
- High pressure common rail direct injection
- 9.1 L/hr (2.4 gph)
- 4WD: 23.6 kW (31.6 hp)
- 4WD: 23.2 kW (31.1 hp)
- Rear - 540 rpm
- Standard transmission; forward/reverse: Gear 4WD / eHydro (electronic hydrostatic) | Transmission gear ranges: 12F/12R PowrReverser (PRT) Infinitely variable - 3 range
- Open center
- Pump rated output: Steering 22.3 L/min (5.9 gpm) | Implement 32.5 L/min (8.6 gpm), 54.5 L/min (14.4 gpm)
- Hydrostatic power steering
- Dual gear
- Operating: 172.4 bar (2500 psi)
- 500 CCA
- 12-V: 75 amp
- size: 1.4 kW (1.9 hp)
- Farm - 7-14 | Turf (Gear 4WD) - 27x8.50-15 | Turf (HST 4WD) - 25x10.5LLx15 | R4 - 25x8.5-14
- Farm - ?11.2-24 | Turf - 41x14-20 or 41x18LL-16.1 | R4 - 15-19.5
- 720-1450 kg (1587-3197 lb)
- 2400 kg (5292 lb)
- 172.7 cm (68 in.)
- Front axle clearance: 31 cm (12.2 in.) | Turning radius with brakes: 2.7 m (8.8 ft) | Turning radius without brakes: 2.8 m (9.2 ft) | Front tread range: 114 cm (44.9 in.) | Rear tread spacing: 103.1 cm (40.6 in.)
- Rollover protective structure (ROPS): 1315.4 kg (2900 lb) | Cab: 1619.3 kg 83570 lb)
- 3-Point category 1 | 24-in. behind link arms: 997.9 kg (2200 lb)
- Crankcase with filter: 4.8 L (5.1 qt)
- 23.8 L (6.3 U.S. gal.)
- Approximate shipping (open-station; cab):
- Emissions compliance: Final Tier 4 | Number of cylinders: Three | Cylinder liners: Cast-in-block | Left-hand reverser | Brakes: Multi-plate wet disc | Clutch, wet/dry: Wet | Cruise control | Draft control sensing: Position control | Remote control valves available: Up to four rear remotes | PTO Control: Position control | PTO Clutch: Wet disc | Brake (for mid and rear PTO): Multi-plate wet disc | Engagement method: Electro-hydraulic | Rollover protective structure: Type Foldable | Platform - flat/straddle: Flat | Gear shift location - console/floor: Left-hand side | Cab Compliance: Complies with OSHA, SAE, and CSA standards for roll-over protection | Cab Visibility: 360 degree (angle) | Cab Doors: Two | Cab Noise rating: 80 dBA | Seat equipment: Scissor-link
Recommendations
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.