Chickasaw Equipment Co., Inc.

  • 552 W. Madison Street
  • Houston, MS 38851
  • Call Us: (662) 456-3391
  • https://www.chickasawequipment.com/
Print This Page

2024 Kubota R Series R430

Information

2024 Kubota R Series R430

Compact design with impressive power allows the R430 to get the work done where larger loaders can't fit. The R430 also delivers big on comfort in every season with an available enclosed cab featuring heat and A/C.

Features may include:

Powerful Kubota Engine

The R430 boasts a gross rating of 47.6 HP (SAE J 1995) that provides the extra muscle needed for all of the chores that the loader is capable of performing.

Comfortable Work Station

Comfort and convenience are the keys to operator efficiency. The working station is mounted on rubber ISO mounts to minimize sounds and vibrations. Increase your comfort level in all seasons with an enclosed heated and A/C cooled cab.

Rear Backhoe

The RBK4009SA backhoe allows the operator to dig a trench up to seven feet deep and 24 inches wide.

Load Sensing Transmission

As the travel and loading conditions change, the R430's transmission automatically shifts to compensate to provide maximum torque and speed for efficient ground speed operation. The manual switch can be operated with a convenient button located on the loader control level.

Limited Slip Differential

Mud, sand, snow are no problem for the R430's front limited slip axle. If a front wheel slips, the power is transferred to the opposite wheel to restore traction.

Hybrid Link Design

The well-balanced cylinder position of the Z link provides strong bucket break out forces and a lift path almost parallel to the ground for superior reach and lift.

Photos

Highlights

  • Houston, Mississippi
  • 2024
  • Kubota
  • R Series R430
  • D1830-CR-TIE4-WL5
  • Hydrostatic transmission
  • Available
  • Hinge Pin: 9 ft 2 in | Dump Height at Fully Raised Position: 7 ft 2 in

Specifications

  • 2024
  • Kubota
  • R Series
  • R430
  • Compact
  • D1830-CR-TIE4-WL5
  • Tier 4
  • Output (SAE J1995 gross): 47.6 hp (35.5 kW) | Output (SAE J1349 net): 44.5 hp (33.2 kW)
  • 2600
  • 11 cu. in.
  • Hydrostatic transmission
  • Front/Rear Axle Traction Lock: Limited slip differential
  • Enclosed wet disc
  • 12.5/70-16-8PR
  • Traveling Speed High: 12.4 mph (20.0 kph) | Traveling Speed Low: 3.0 mph (4.8 kph)
  • Traction Force: 5485 lbs (24.4 kgf) | Bucket Breakout Force: 5215 lbs (23.2 kg) | Rated Operating Capacity: 2298/2474/504/1625 (ROC) | Loader Raise / Lower Time: 4.4 / 3.3 sec
  • Auxiliary Rate: 11.1 gpm (42.1 lpm)
  • Auxiliary psi: 2697 kgf (18.6 cm2)
  • Frame Oscillation Angle: 8 degree | Steering Angle: 40 degrees | Reach Fully Raised at Maximum Dump Angle: 2 ft 9 in | Maximum Dump Angle: 44 degrees | Articulation Angle: 40 deg. (each direction) | Angle of Rear Frame Oscillation: ±8 (deg.)
  • 14' 4" ft (4355 mm)
  • 8' 3" ft (2515 mm)
  • 4' 12" ft (1520 mm)
  • 11" ft (280 mm) | Loader Clearance Circle: 12' 1" ft (3695 mm)
  • Track Circle: 10' 1" ft (3085 mm)
  • Hinge Pin: 9 ft 2 in | Dump Height at Fully Raised Position: 7 ft 2 in
  • Standard Bucket Capacity: 0.5 yd3
  • Tipping Load- Full Turn: 4596 lbs. (2085 kg)/4949 lbs. (2245 kg) / 3009 lbs. (1365 kg) / 3251 lbs.(1475 kg) | Tipping Load - Straight: 5335 lbs (2420 kg)/5743 lbs (2605 kg) / 3494 lbs (1585kg)/3770 lbs (1710 kg)
  • at Ground Level: 3687 lbs (16.4 kN)
  • 14.3 gal (54 l)
  • System: 15.3 gal (58 l) | Reservoir: 11.1 gal (42 l)
  • 7758 lbs (3519 kg) / 8232 lbs (3734 kg)