2024 Kubota DM 800 Series DMC8536R

2024 Kubota DM 800 Series DMC8536R

Whether you need your mower on the left or right side, the Kubota DMC8536R center pivot disc mower has got you covered. An impressive working width of 11’ 10” ensures you’re covering plenty of ground, and the rotating, three bladed discs with independent suspension keeps that precision going, even on variable terrain. When the job is all said and done, a 11’ 2” transport width gets you easily back to the homestead and doesn’t impose on your windrows. Versatility like you’ve never experienced before, the DMC8536R is here to impress.

Features may include:

Roller conditioning provides gentle yet effective handling of fragile crop such as alfalfa or clover. The 8.8" diameter wide rubber rollers are made from highly durable polyurethane with a steel core. This design ensures straight rollers that will not flex out of shape, regardless of the force transmitted onto them. The spring-controlled pressure exerted between the two rollers guarantees uniform conditioning intensity, regardless of the amount of crop passing through the rollers. Additionally, if an obstacle is encountered, the spring tensioning system will separate the rollers, leaving an opening of up to 2.4" allowing objects to pass without damage to the rollers.

DMC8500 series models have a lifting height of 1'6" to ensure excellent ground clearance for transport and during headland turning.

Mowers can be fitted with the 'Express' system for quick and easy changing of knives. Simply place the lever around the bolt, release the spring by turning the lever and the knife is ready to be replaced with a new one.

The fully welded Kubota cutterbar with overlapping C-channels makes for a stiff and strong design, ensuring a high level of durability. The cutterbar’s design, with machined gears and large bearings along with low oil requirements, allows for a low working temperature for efficient oil cooling and lubrication of the entire cutterbar.

COUNTER

With three blades per disc, Kubota mowers are constantly cutting. This means a third less load per blade, an even load on the drive and smoother power usage – which produces an even, cleanly cut stubble. Each steel blade is precisely angled to immediately discharge the cut crop upwards by both air flow and mechanical action.

A simple crank adjusts the whole cutterbar assembly up or down to a desired stubble height. Additional skids are available to increase cutting height.

• CENTER PIVOT DRAWBAR

The DMC8500 models are equipped with a center pivot drawbar for mowing both to the right and left side of the tractor. This important advantage in mower design allows operators to mow in one continuous pattern, without the need for constantly opening up new headlands. Consequently, time consuming short runs are eliminated and mowing capacity is increased.