Engine
Engine Power
Tractor horsepower: 70 to 250 hp (52.2 to 186.4 kW)
Lubrication
Gearbox: Gear lube 80-90W EP
Drivetrain
Driveline
Input: ASAE Cat. 6 with constant velocity u-joint. | Intermediate & wing: Cat. 5 with slip-clutch
Gearbox
horsepower: Splitter gearbox: 250 hp (186.4 kW) / Center & wing gearbox: 210 hp (156.6 kW)
Wheels & Tires
Wheels
6" x 9 x 21" Laminated tires / 27" x 7.75" Used aircraft tires with foam filling / 29" x 9" Used aircraft tires without foam filling | Number of: 5 - Wheel option: 4 on transport axle and one on wing axle. / 6 - Wheel option: 4 on transport axle and two on wing axle.
Operational
Operating Speed
Blade tip: Up to 18,000 fpm
Chassis
Hitch/Type
jack: Standard rating
Lights and Safety
Lighting
Signal: LED / 7 Pin connector: SAE J560 pin configuration
Dimensions
Dimensions
Cutting capacity: 3" (7.6 cm) | Lift hydraulics Center deck: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. / Right wing: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. | Wing folding hydraulics: 3" x 12" single-acting hydraulic cylinder complete with hose & fittings | Wing flex while operating: Max. 20o down, can float up as needed as long as the wheel(s) are still on the ground. | Side skirt material: 1/4" (6 mm) plate | 4 Blades (2 per carrier): 1/2" x 4" Heat treated free swinging alloy steel with up lift. | Blade overlap: 6" (15 cm) | Axle fasteners: 1 1/4" Greasable pins
Cutting Width
13' - 6" (4.11 m)
Overall Width
14' - 9 1/4" (4.5 m)
Transport Width
Min: 9' - 2 3/4" (2.81 m) with cutting height at 2" (5 cm)
Overall Length
17' - 8 1/2" (5.4 m) with cutting height at 2" (5 cm)
Deck Height
13" (33 cm)
Height
Cutting: 2" to 12" (5 to 30.5 cm)
Capacities
Oil capacity
Gearbox: Divider gearbox: 6.2 Pints (2.93 L) / Center deck, right-hand deck spindle gearboxes: 4.7 Pints (2.22 L)
Features
jack: 7,000 lbs (3175 kg)
Weights
Weight
Total machine: 6,125 lbs (2778 kgs) Front & rear single chain guards, 5 AC tires, diamond blade bar with dishpan, without deck ring, CV driveline, and standard clevis. / Tongue: 2,220 lbs (1007 kgs)
Features
Features
Skid shoes Wing deck: Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe / Center deck: Replaceable: 2 Skid shoes / Weight box: Reversible & replaceable: 1 Skid shoe | Blade bolt: Keyed with hardened flat washer & locknut. | Stump jumper / blade holder: Standard: 1" thick diamond blade bar | Front & rear guards: Single chain or double chain. | transport axle: Spring-cushioned on center transport axle.
Construction Material, Deck
1 - Piece, 10 gauge (3.4 mm).
Hub Type
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.