2024 Vermeer® MC105 Base

Information

2024 Vermeer® MC105

Features may include:

Simple maintenance, long-lasting durability
  • Simple and convenient are two key words to describe the Q3® cutter bar. Quick and convenient to check and replace key components — the Quick-Clip® blade retention system, Quick-Change™ shear ring and quick-check oil for each individual cutter unit.
Built with the operator in mind
  • Say goodbye to a tractor that’s dedicated to only mowing for the summer. Two hitch options provide a simple, one-person hookup — the drawbar swivel hitch or patented 2-point Quick Hitch — to help you get out to the field in no time.
  • Optimize hay quality with two different types of conditioners to select from for your operation. Steel rollers offer durability and powerful crimping action while rubber rollers focus on leaf retention of the crop.
Consistent, clean cut
  • Looking for a second cut as good as the first? Standard topping stops help protect the field by maintaining the integrity of the cutter bar flotation — preventing it from hitting the ground.
  • Adjust to different crops and conditions on the go. Toolless hydraulic pitch adjustment allows operators to change the angle of the blades on the cutter bar to help them achieve maximized yield while minimizing damage to the field.
  • Achieve a consistent, clean cut with hydraulic suspension. With this system, operators can conveniently adjust down pressure based on field conditions with the simple twist of a knob.

Photos

Highlights

  • Houston, Mississippi
  • 2024
  • Vermeer®
  • MC105 Base
  • Available
  • Conditioner: 102 in
  • Working: 73 in | Cutter bar lift clearance: 17 in | Cut: 1 in - 8 in (2.5 cm - 20 cm)

Specifications

  • 2024
  • Vermeer®
  • MC105
  • Base
  • General
  • Drive: 540 rpm | recommended: 75 hp | Roller Speed: 740 rpm
  • Torque Protection: Friction over - running clutch — cutter bar; Banded V-belt — rollers
  • Nitrogen-charged accumulator suspension system
  • 12.5L-15
  • Disc: 2700 rpm
  • 2 double-acting
  • 1900 psi
  • Rate: 6 gpm
  • Drawbar with swivel gearbox OR 2-point with swivel gearbox, category II or III N
  • Mower swung out offset: 62 in | Disc Diameter: 23 in
  • 73 in
  • 9.8 ft ends up | 12.8 ft ends down
  • Conditioner: 102 in
  • 20.2 ft
  • 10.5 ft
  • Minimum: 40 in | Maximum: 95 in
  • Working: 73 in | Cutter bar lift clearance: 17 in | Cut: 1 in - 8 in (2.5 cm - 20 cm)
  • 12.8 ft
  • 9.3 in
  • Total: 5140 lbs | with steel roller conditioner: 5140 lbs |Tongue: 1340 lbs
  • Number of Discs: 7 | Number of Blades: 14 | Roller Conditioner Type: Intermeshing steel rollers or rubber rollers| Platform: (for tall crops) Standard | Topping high cut kit: Standard| Quick Clip® blade retention system: Standard | Quick-Change™ shear ring: Standard| Highway Lights: Standard
  • Q3®
  • Curtain: 1,400 gm/m2 polyester woven material with flexible PVC covering
  • Angle: Hydraulic pitch control
  • 3-year limited cutter bar
  • Conditioner Drive: 4-band banded V-belt